How to Make Friendship Bracelets Using Macrame Knots

Learn how to make some cool friendship bracelets using macrame knots! These are a snap to make and they’re fun to make with friends.

Remember being a kid and making friendship bracelets at every summer camp and sleepover party? I’ve been feeling a little nostalgic lately and remembering the friendship “hemp bracelets” my friends and I used to make as kids. We called them hemp bracelets because we made them out of hemp rope. I didn’t actually know we were tying macrame knots until I was an adult trying to learn how to macrame!

several friendship bracelets worn on my wrist.

Funnily enough, I actually learned how to make these bracelets from my older brother, who learned from our older cousin. They made all sorts of crazy stuff with these knots, bracelets, necklaces, anklets, really all the accessories. My brother even made a guitar strap using this macrame knot method!

*This post contains affiliate links

Guitar strap made out of hemp rope tied in macrame knots.

Supplies for Friendship Bracelets

I am using yarn for this tutorial. As I mentioned above, you can also use hemp rope for these. Another option is embroidery floss.

To help hold these in place while you work on them, you can use tape or a piece of cardboard. (I cut up a used cereal box for my cardboard.) As kids, we also used safety pins to help hold the strings. You can use whatever you have on hand.

In the photo below, you can see that the choice of materials will affect how the bracelet looks when it’s finished. One bracelet is made with yarn, and the other with embroidery floss. The embroidery floss comes out a bit smaller than the yarn.

Showing the difference in size between a bracelet made with embroidery floss and yarn. — Pink is done in yarn, Purple in embroidery floss.

Now let’s make some bracelets!

Also if you’re looking for more fun jewelry to make, check out these pom pom earrings, or Druzy earrings.

Friendship Bracelet Prep

Take the yarn and cut two strings about forty inches long each. (You may need to adjust the length a little depending on your wrist size, but you probably won’t know yet until you’ve made one.) Put the two string side by side and treat them as one for this part.

Take one end of the pair and wrap it around your wrist to get a wrist measurement.

Measuring the string ends around my wrist to gauge size.

Add about 2 inches to the wrist measurement, and fold the the pair of strings over.

Strings folded at the end of the wrist measurement.

Using the folded end of the strings tie a simple overhand knot on the bight leaving a small loop at the top.

knot tied at end of wrist measurement in strings. Two loops have been made as a result of the knot.

Four strings coming from the two loops at the top of the knot. Two string are short, two are long.

Now you’ll need to hold the loop and the short strings down to keep them taught enough to tie knots around.

You can do this by either taping the loop and the short strings down on a flat surface, or you can cut a slit at the top and bottom of a small piece of cardboard, then slip the loops in one side and the short strings in the other.

Slipping the strings loop side into a slit in cardboard. — slipping the loop side onto the cardboard. Put the whole knot through the slit.

Slipping the short strings onto the cardboard on the side opposite of the loops. — Slipping the short strings onto the cardboard.

Tying the Knots

You’ll start the bracelet by tying a single knot around the two center strings. I always start by taking the left string over the center strings and placing the right string on top of the left string. (see image below)

Left string in placed over the two short strings, and the right string is on top of the left string.

Then thread the right string under the short strings and through the hole.

knit is made and is ready to be tightened.

Pull it tight all the way to the top by the two loops.

You’ll continue to tie knots like this all the way down the two short strings until the bracelet fits your wrist.

Starting the knot on the same side every time will give you a twisted appearance to the bracelet.

Showing the difference in size between a bracelet made with embroider floss and yarn.

To achieve a straight pattern on the bracelet instead of a twisted one, you just alternate the side that you start the knot from.

friendship bracelet done with a straight pattern instead of twisted.

Finishing the Friendship Bracelets

Bracelet made needing one more big knot to finish it off. — How it looks before you tie the knot.

Once you have the bracelet the length you want, tie a simple overhand knot with all four of the strings together. This will secure all previous knots tied.

Tying the final knot on the bracelet. — Tying the knot.

Final knot tied on the bracelet. — How it looks with the knot tied.

To close the bracelet take the bottom where we just tied the knot and push it through the loops at the top of the bracelet.

You can tie more knots on the last knot of the bottom if the bottom slips out of the top loops too easily, or if you want it to be more secure. Just make sure that you don’t make it so big that it not longer fits through the loops.

Additional knots tied to make the original knot bigger. — Additional knots tied to make my bracelet end fit my loops without slipping off.

You can either leave a few tails for a fun look, or trim them all off

Tails left on the friendship bracelet. — Finished bracelet with tails.

Finished friendship bracelet without tails. — Finished bracelet without tails.

Alternatively, you can add a button that will fit through the end loops to secure it on your wrist. Just use an embroidery needle and thread the strings up the button holes, then back down. When all the strings are back on the bottom of the button, tie them in knots to keep the button on. Trim any additional strings.

Several Friendship bracelets finished and word on my wrist. Showing the button and knot finishes.

The bracelet is now finished!

Another fun thing you can do with these bracelets is alternate between the straight knots and the twisted knots to create a more visually interesting friendship bracelet.

Friendship bracelet with straight pattern done on ends and twisted pattern done in center.

As kids, we would even string beads on them here and there. Some people also make keychains out of these.

Now that the bracelet is finished, you can wear them, give them to friends or simply enjoy them! Thank you so much for reading and I hope you have fun making these friendship bracelets.